Deatsch Werks 320+ LPH Intank Fuel Pump, 600-700 HP

[Deatsch Werks 320+ LPH Intank Fuel Pump, 600-700 HP]

Available Options:

Fitting kit :

NZD 200.00

If you have a BIG HP engine that requires a lot of fuel from an in-tank fuel pump and you don't want to run external fuel pumps, then this pump is all you need!! and best part of this pump is that its the same size as a Walbro! So you don't need to modify anything to fit it! Direct replacement.

No longer is the need to use a big old fashioned / technology of the Bosch 044 fuel pumps that weigh a tone and are very noisy!!

Introducing the highest flowing in-tank fuel pump to date!

Flows 320+ litres per hour at 13.5V/40psi
Flows 430+ litres per hour at 18.0V/40psi
Turbine impeller compared to metal rotor
In-tank fuel pump
Same size as a Walbro!!
E85 / Ethanol compatible!!
Installation kit included
3-year no-fault warranty!!!
Super quiet!

Why can't you compare our 320lph DW300 series pump to a walbro 255lph? Because its not meant to compete with it on the price or performance.

DSRTurbo NZ Ltd are the New Zealand Dealers for www.deatschwerks.com

Notes:
We don't like to give specific HP numbers on what a pump will support, because every car is different and there are many, many variables that go into it. One big one is fuel pressure, because with any fuel pump, as fuel pressure goes up fuel pump flow goes down.

But in general, our 320lph, DW300 series pump on a Forced induction car should support between 600-700 hp @ 13.5V on regular gas, and between 500-600 HP on ethanol. Higher for non forced induction cars.

DW301 at 13.5 volts
PSIG	AMPS	LTR/HR	BHP
30	10.6	335	1060
40	11.4	320	1015
50	11.6	295	935
60	11.9	275	870
70	12.5	250	790
80	13.2	230	730
90	13.7	205	650
100	14.2	185	590

DW301 at 16 volts
PSIG	AMPS	LTR/HR	BHP
30	13	405	1280
40	13.4	385	1220
50	13.9	360	1140
60	14.7	345	1090
70	15.1	320	1015
80	15.5	300	950
90	16.1	280	890
100	16.3	255	810

DW301 at 18 volts
PSIG	AMPS	LTR/HR	BHP
30	15.3	460	1460
40	15.7	430	1360
50	16.5	415	1300
60	16.8	395	1250
70	17.2	370	1170
80	17.7	355	1120
90	18.2	340	1080
100	18.5	315	1000

Flow Date Notes:

Data collected in-house on King 7500 series flow meter.
Values represent a 10 pump average.
Results independently verified by 3rd party testing.
BHP horsepower figures are approximate values and can vary greatly from car to car.

Customers who bought this product also purchased

Type R Heavy Duty...	Set, Audi/Vw, 1.8L,...	NGK-4644, V-POWER,...

Heavy Duty, with...	K&N, GOLD Oil Filter,...	Garrett GT3582R,...