GENUINE TYPE S Tomei Fuel Pressure Regulator.
When the injectors and fuel pump are upgraded to a larger flow setup the stock fuel pressure reg may not be enough to suit the new required pressures for the new setup. As well as that the stock Reg is already preset from the factory for the standard setup and is non adjustable so it will restrict the tuning potential of the car on the day. The Tomei Fuel Pressure Regulator will ensure stable pressures are supplied with its over sized diaphragm. This design has been proven to maintain the required pressure levels with any adjustments made.
The Hard Anodizing finish adds protection to the Regulator since the Reg will spend it’s time in a harsh environment. This finish helps protect the Reg from harmful grit and grime and with the additional resistance to corrosion and heat and electrical insulation these aspects help maximize its durability and safety.
Has a 1/8 pt service port for use of fitting a gauge/ sensor.
Vacuum nipple will rotate 360 degrees for easy fitting of hose routing.
Comes with AN6 1/8×2 and 8 mm straight 1/8 NPT ×2 fittings which are the most popular type of fitments for fuel piping.
Ready to install and use from the box.
Please click below Images to see what fake Tomei regulators look like:

Manually adjusting Freight - Australia & International Only:
Website will generate FREIGHT Charge for EACH PRODUCT.
In the "What's in my Cart page" ( YOU THE BUYER ) manually adjust the freight to suit.
Please adjust the Freight ( In the What's in my Cart page )