Brand New Garrett GT3582R CHRA (Core)
If you have a Ford XR6 and the Turbo is on it's way out or gone already. Then this maybe a cheaper option for you than having to purchase a complete new Turbocharger.
What you see here is a GT3540R CHAR ( Exact same CHAR that is used in a FORD XR6 ) This CHAR ( bearing housing & Wheels ) will direct fit in place of you original CHAR. That means all you have to do is remove your broken Turbo from your Ford XR6 and fit this new CHAR ( pictured ) here. its as simple as that. No modifications are required - Direct replacement!
Note:
Ask your self this. Why has my original Turbo failed in the first place?? Most likely that the Turbo oil feed filter has blocked up and starved your Turbo of oil. There is a oil filter that screws into the passenger side of the block that the oil feed line ( for the turbo ) is screwed into. Also the oil feed line. Where the line is attached above your turbo and turbo manifold. The heat from the manifold can cause the oil in the oil feed line to get blocked.. Like a dirty pipe.. You need to make sure that the oil feed lines is perfectly clean before fitting any Turbo-Charger.
