TiAL Q BOV ( Blow off Valve )
For use on turbo-charged and super-charged applications. The TiAL BOV body and all internal components are CNC-machined from 6061 aluminum alloy. It features a large 1.98 in (50.5 mm) valve.
- The V-Band design aluminum mounting clamp gives a very clean and unique appearance. The clamp is anodized and uses Stainless Steel hardware for a long lasting, corrosion-free appearance.
- The valve seal utilizes a Viton O-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are Teflon-lubricated, hard anodize-coated for wear resistance.
- The Blow Off Valve also comes with our own machined aluminum banjo-type air fitting and bolt, with over sized 10mm hose barb for quick actuator response. The actuator has a high temp silicone Nomex-reinforced diaphragm for long life.
- An aluminum weld base mounting flange is furnished with each unit. The use of 6061 aluminum allows the housing to be anodized with a selection of colors.
- Through countless hours of R&D we were able to make the same size valve flow a staggering 60% more than the original design - that means 60% more air is blown off per cycle! This is the highest flowing BOV on the market.
What comes with the Q-BOV?
Q-BOV Comes with it.
V-Band Clamp
Aluminum mounting mount
Vacuum nipples
Nuts & Washers
Nice TiAL Box
Tial instructions
Basically everything you need comes with it apart from the engineer that going to have to weld it onto your intercooler piping!